|
INLAY BITS 1/8" SHANK
2 flute solid carbide down cut spiral bits.
Gives super clean cut with no chipping. Made in America with
high quality carbide.
.125" diameter ..... $23.95 each
.031" diameter ..... $28.95 each
.025" diameter ..... $30.95 each
1/4" to 1/8" router collet reducer
..... $6.99 each
|
|
INLAY KIT W/2 FLUTE SOLID CARBIDE
BIT
With this kit and your shop made templates,
you can cut exact inlays time and time again. Highly recommended
for the experienced or beginner inlay artist. Comes with 1/4"
shank 1/8" diameter solid carbide spiral cut bit and
alignment pin.
$36.99 ..... each
|
|
SHEAR CUT FLUSH TRIM BIT
This is a great cutter for flush trimming
guitar, mandolins, or violin tops and backs flush with the
sides after they have been glued together. The shear cut provides
a downward cut to prevent lifting and splintering of your
top and back wood. It has a 1 3/16" cutting length and
is 1/2" in diameter.
$22.99 ..... each
|
|
BOTTOM BEARING FLUSH TRIM BIT
This cutter works great for use on template
patterns or jigs with the bottom mounted bearing. It works
great for my back and top jointing jig. It has a 3/4"
cutting length and is 1/2" in diameter.
$27.99 ..... each
|
|
TRUSS ROD SLOT BITS
1/4" diameter and 3/8" cutting depth
core box bit. This is a great bit for round bottom truss rods.
$21.99 ..... each
1/4" diameter and 3/4" cutting depth
straight bit. This is a great bit for square truss rods.
$20.99 ..... each
|
|
4 pc. ROUND OVER ROUTER BIT SET
This is a great set for radioing head and
tail blocks or what ever else you may need to radius. Comes
with 1/8", 1/4", 3/8", and 1/2" radius
bits. Made with high quality carbide steel.
$24.99 ..... each
|
|
29 pc. BRAD POINT DRILL BIT SET
Get perfectly round splinter free holes with
these high quality carbon steel brad point bits. This set
comes with sizes 1/16" through 1/2" in 64th increments.
$24.99 ..... each
|
|
7 pc. BRAD POINT DRILL BIT SET
Get perfectly round splinter free holes with
these high quality carbon steel brad point bits. This set
comes with 1/16", 1/8", 3/16", 1/4", 5/16",
3/8", and 1/2" drill bits.
$11.99 ..... each
|
|
7 pc. DRILL BIT STOP SET
These are a must when drilling holes that
need to be a specific depth. This set includes stops fit on
the following drill bit sizes 1/8", 3/16", 1/4",
5/16", 3/8", 7/16", and 1/2. Includes hex wrench
for set screws on the stop which keep them on your drill bit.
$9.99 ..... each
|
